Dickson Sunbrella - Sunbrella Plus

Sunbrella Plus

Homepage » Boat equipment » Sunbrella Plus

Fabrics
Applications
Characteristics
Care
Documents
Photos

Description

The natural choice when fitting out your boat, Sunbrella Plus is ideal for protecting both equipment and those on board from the wind, rain, snow and sun. The acrylic coating added on one side increases watertightness and resistance to mildew, while retaining the breathability of the fabric. In doing so, it prevents the build-up of condensation and humidity. Its solution-dyed acrylic fibres ensures long-term colour fastness. Easy to maintain, Sunbrella Plus is available in a width of 152.5cm.

	Résistance aux UV	Imperméabilité	Résistance à la rupture	Résistance au feu	Degré d'occultation	Weight
Sunbrella Plus						320 g/m²

Characteristics

Composition : 100 % Sunbrella solution dyed acrylic
Finish : Resin based anti-fungi coating, water and UV resistant.
Weight : 320 g/m²
Width : 152 cm
Recommended use : Cockpit cover, spray hood, biminitop, sun awning, flybridge, winter cover
Guarantee : 5 Years

The documents relating to this fabric

No document is currently available.



	FT-Sunbrella Plus-Fr.pdf Technical sheet
	FT-Sunbrella Plus-En.pdf Technical sheet
	FT-Sunbrella Plus-De.pdf Technical sheet
	FT-Sunbrella Plus-Es.pdf Technical sheet
	FT-Sunbrella Plus-It.pdf Technical sheet
	FT-Sunbrella Plus-Du.pdf Technical sheet
	FT-Sunbrella Plus-Se.pdf Technical sheet

Care

Regularly maintaining your fabric makes it easier to clean. We recommend simply hosing it off with a jet of clear water, then brushing it with a soft brush. We strongly advise against using a high-pressure cleaner to wash your fabric. Once cleaned, leave it to dry in the open air. For harder cleaning tasks, we recommend using mild soap or 303 Fabric Cleaner, diluted in warm water. We also recommend that you re-waterproof the fabric with 303 Fabric Guard after each washing.